Max’s RC Car Wall Mounts

Designed by Max and made for displaying your favourite RC cars properly.

Our RC car wall mounts are 3D printed using a dense infill, making them exceptionally strong and dependable. We have tested them with a growing collection of RC cars and, so far, we haven’t had a single mount fail.

They provide a simple way to get RC cars off shelves, floors and workbenches while turning them into part of the room’s display.

Available Colours

The mounts are available in a growing range of colours.

We are constantly expanding the selection, but if there is a particular colour you would really like, please get in touch. We may already have the filament available or be able to source it for you.

Choosing the Correct Size

Mounts are available for the following approximate outside tyre diameters:

• 70mm
• 80mm
• 90mm
• 100mm
• 110mm
• 120mm

Measure directly across the complete tyre at its widest point. Do not measure only the plastic wheel or rim.

Some Tamiya cars have different-sized front and rear tyres, so measure the tyres that will sit in the wall mounts before ordering.

Tamiya Compatibility Guide

70mm Mounts

Suitable for Tamiya’s 1/14 racing trucks, which use approximately 70mm-diameter tyres:

• Team Hahn Racing MAN TGS
• Team Reinert Racing MAN TGS
• Buggyra Racing Fat Fox
• Tankpool24 Mercedes-Benz Actros
• Mercedes-Benz Actros MP4 Racing Truck
• Grand Hauler Racing Truck
• Freightliner Cascadia Evolution Racing Truck

These are generally based on the TT-01 Type-E or TT-02 racing-truck platform. Tamiya officially specifies 70mm tyres for the racing-truck range.

80mm Mounts

Suitable for models with approximately 80mm front tyres, including:

• Rising Fighter
• Neo Fighter Buggy
• Neo Mighty Frog
• Racing Fighter
• Fighter NXGEN
• Aqroshot
• Sand Viper
• Desert Gator
• Super Fighter G
• Holiday Buggy
• Nissan Titan Racing Truck

Most DT-02, DT-03 and DT-04 buggies use approximately 80mm front tyres but larger rear tyres, usually around 86mm. The Neo Fighter and Fighter NXGEN, for example, use 27 × 80mm front tyres and 41 × 86mm rear tyres.

The Rising Fighter also uses 80mm front tyres and approximately 86mm rear tyres.

Please measure carefully, as an 80mm mount may only be appropriate for the front axle on these cars.

90mm Mounts

Suitable for Tamiya CC-02 vehicles fitted with the standard 33 × 90mm tyres, including:

• 1990 Land Rover Defender 90
• Mercedes-Benz G 500
• Toyota Land Cruiser 300
• Toyota Land Cruiser 40
• Ford Baja Bronco

Tamiya specifies 90mm tyres on the standard CC-02 trail-truck setup.

They may also suit some vintage and reissued buggies with tyres close to 90mm, but measuring the actual car is recommended.

100mm Mounts

Suitable for cars with tyres measuring approximately 95–100mm, including:

• Blitzer Beetle
• Stadium Blitzer
• Comical Avante
• Comical Hotshot
• Comical Egress
• Comical Frog
• Comical Hornet
• Comical Grasshopper
• Comical Lunch Box

The Blitzer Beetle uses approximately 98mm front and 99mm rear tyres.

The Comical models vary slightly depending on their chassis and tyre set, with most measuring approximately 95–99mm. Please measure the actual tyres before ordering, particularly where the front and rear widths or diameters differ.

110mm Mounts

Suitable for Tamiya models fitted with approximately 110mm tyres, including:

• Dynahead 6×6
• Vajra
• Nitro Crusher
• Nitro Thunder
• Toyota Land Cruiser 40 Pickup on the GF-01FT chassis
• Models fitted with Tamiya NDF-01 V-Tread Block tyres

The Dynahead uses six 50 × 110mm tyres.

Tamiya’s NDF-01 V-Tread Block tyres are also officially listed as 110mm in diameter.

120mm Mounts (124mm)

Our nominal 120mm mount is intended for Tamiya cars with tyres measuring approximately 115–123mm.

Suitable models include:

• Lunch Box
• Lunch Box Black Edition
• Lunch Box Gold Edition
• Lunch Box Evo
• Midnight Pumpkin
• Midnight Pumpkin Black Edition
• Midnight Pumpkin Metallic Special
• Wild Willy 2
• Wild Willy 2 Blockhead Motors
• Volkswagen Type 2 Wheelie
• Farm King Wheelie
• Konghead 6×6
• King Yellow 6×6
• Volvo A60H Hauler 6×6
• Toyota Land Cruiser 40 Pickup on the GF-01TR chassis
• Squash Van
• Quirkhopper
• Toyota Bruiser
• Toyota Mountaineer
• Toyota Hilux High-Lift models using approximately 123mm tyres

The Lunch Box and related CW-01 vehicles use approximately 115mm tyres.

WR-02 and several GF-01TR vehicles also use approximately 115mm tyres.

The Squash Van and Quirkhopper use 60 × 123mm tyres.

The Toyota Bruiser also uses approximately 123mm tyres.

Important Compatibility Information

This guide covers common factory tyre sizes, but Tamiya models are often modified with alternative wheels and tyres.

Tyre dimensions can also vary slightly because of:

• Different tyre compounds
• Foam inserts
• Age and wear
• Manufacturing tolerances
• Aftermarket wheels and tyres
• Previous-owner modifications

For the best fit, always measure the outside diameter of the tyres fitted to your actual RC car before ordering.

If you are unsure, send us the model name and a photograph showing the tyre measurement, and we will help you choose the most suitable mount.